Automatic Utility Sump Sink Pump

The good news is that they are all located in close proximity to each other, so there will be a lot of connecting at one end of the system, then a long ride to the other end of the structure to get to the main soil pipe that exits the structure. The real blessing, though, goes back to the beginning when we were planning the framing for the second floor You may have seen this pic already.

It goes back to framing for the second floor.

Bathroom Plumbing Services. Tub & Shower Valves. If your plumbing fixtures are draining slow we can snake the drain and or replace the drain if needed. Click on the link below for more details Symmons. Bathroom Faucets. Basement Plumbing Services. Laundry Connection.

Alternate Parts The parts supplied are in the washer basket. Your installation may require additional parts. Page 3 Selecting the proper location for your washer improves The washer can be installed using the standpipe drain system performance and minimizes noise and possible washer “walk”. Select the drain hose installation method you need. Your washer can be installed in a basement, laundry room, closet, See “Tools and Parts. Page 4 Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure the washer is properly grounded. Do not have a fuse in the neutral or ground circuit. Electrical Shock Hazard This washer must be grounded. Page 5 Looped power cord Straight power cord Remove power plug and yellow strap from machine base to release the rear beveling system. Looped power cord Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer.

Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel. Page 6 Proper connection of the drain hose protects your floors from The washer must be connected to the water faucets using new damage due to water leakage.